This ZKTeco attendance machine setup guide is for office managers, HR staff and IT people who have just unboxed a ZKTeco K40 or a similar keypad fingerprint terminal and want it working today. The short answer: mount it near the entrance, set the date and time, add an administrator first, enrol every employee's fingerprint, then either connect it to your network for software download or pull reports with a USB pen drive. The steps below follow ZKTeco's own K Series user manual, explained in simple language.
ZKTeco Attendance Machine Setup: What You Need
- The terminal, its power adapter and wall-mount screws.
- A network cable to your router or switch, if you want to download data over LAN.
- An empty USB pen drive, if you prefer offline reports.
- A computer with ZKTeco's attendance software, if you will process payroll on a PC.
- A list of employees with ID numbers and names, so IDs match your payroll records.
One note before you begin: ZKTeco sells many K Series and F Series models, and menu names differ slightly between models and firmware versions. Some units show a "User" menu with sub-items, others show "Add User" directly on the main menu. The logic is the same, so follow the closest match on your screen.
Step 1: Mount and Power the Machine
Choose a spot inside the entrance, out of direct sunlight and rain, at a height where staff can place a finger comfortably without bending. Strong sunlight on the sensor can make fingerprints harder to read.
Run the network cable before you fix the unit to the wall. If the model supports door access control, the lock, exit button and door sensor wires also connect at the back, so plan that wiring at the same time. Plug in the adapter and switch the unit on.
Step 2: Open the Main Menu and Set Date and Time
On most K Series units you press and hold [M/OK] on the start screen to open the Main Menu. Then:
- Use the arrow keys to select System and press [M/OK].
- Select Date/Time, enter the correct date and time with the keypad, and press [M/OK] to save.
- In the same System menu you can change the Date Format (for example DD-MM-YY), the keypad beep and the voice prompts.
Get the clock right before anyone punches. Every attendance record is stamped with the device time, so a wrong clock means wrong late and overtime reports.
Step 3: Add an Administrator First
A new machine has no administrator, which means anyone can open the menu. Fix that immediately.
- Main Menu, then User (or Add User on some units), then Add User.
- The device suggests the next free ID. Change it to match your employee number if you want.
- Select Name, press [M/OK] and type it with the T9 keypad, the same way as an old mobile phone.
- Enrol a fingerprint (Step 4) and, ideally, a password as a backup.
- Go to Purview (privilege) and select Administrator.
- Move to the [M/OK] button on screen and press [M/OK] to save.
Create at least two administrators, for example the HR manager and the IT person. If the only admin leaves the company, you will be locked out of the menu.
Step 4: Enrol Employee Fingerprints
Repeat Add User for each employee, keeping Purview as User. For the fingerprint:
- Select Enroll FP and press [M/OK].
- Ask the employee to place the finger flat and centred on the sensor.
- Place the same finger three times in a row until the screen confirms success.
Tips for good fingerprints
- ZKTeco recommends the index, middle or ring finger. Thumbs and little fingers are harder to place correctly.
- Press flat, not on the fingertip, and do not slide the finger.
- Enrol a second finger for staff whose work wears down fingerprints, such as cleaners or factory workers.
- If a finger is very dry or very wet, ZKTeco suggests adjusting the sensor Sensitivity in the System menu rather than forcing repeated attempts.
Password and card options
Enroll PWD lets you set a numeric password (1 to 8 digits by default) for staff who cannot use fingerprints. Card enrolment works only on units that include a card reader module; on some models this is an optional extra. The VerType setting controls whether a user may punch with fingerprint, password, card or a combination.
Step 5: Connect the Machine to Your Network
To pull data into PC software, give the terminal an IP address on the same network as your computer.
- Main Menu, then Comm. (on some units it is inside System, then Comm. Set).
- The factory IP Address is 192.168.1.201, Subnet Mask 255.255.255.0 and Gateway 0.0.0.0.
- Change the IP to a free address in your office range. If your router uses 192.168.0.x, use something like 192.168.0.201.
- Set DHCP to OFF so the address never changes.
- Optionally set a communication Password (1 to 6 digits). The default is 0, meaning no password. If you set one, enter the same password in the PC software.
In the attendance software, add a new device with the same IP address. ZKTeco software normally uses port 4370 for these terminals, so leave that unchanged unless your installer changed it. Then use the software's download option to fetch users and attendance logs.
Network vs USB: Which Download Method Fits You?
| Point | LAN (software) | USB pen drive |
|---|---|---|
| Setup effort | Network cable, IP and software | None, just a pen drive |
| Who collects data | Anyone on the office PC | Someone must visit the machine |
| Payroll reports | Full reports, shifts, leave, export to Excel | Basic reports from the device itself |
| Several machines | All in one software | One pen drive trip per machine |
| Best for | Offices with IT support or more than 20 staff | Small shops and single-branch offices |
Step 6: Download Reports With a USB Pen Drive
Insert the pen drive into the USB port on the machine, then:
- Data Mgt. (or Dn/Upload), then Download Attlog: copies all raw attendance records to the pen drive for use in software.
- Download User and Upload User: move user data and fingerprints from one machine to another. This saves re-enrolling everyone when you add a second machine at another gate.
- On models with built-in reports, Report, then Download Att. Report, saves a ready Excel report ("Standard Report.xls") with attendance statistics.
Step 7: Set Shifts, Rules and Schedules
Many K Series units can calculate attendance without a PC. Under Shift set you set attendance rules and shifts; the device supports up to 24 shifts, each with up to three time ranges. If no shift is set, it uses the default shift. For complex rosters, ZKTeco suggests downloading the attendance setting report to a pen drive, editing shifts and schedules in Excel, and uploading it back with Upload Att. Setting Report. One schedule file covers 31 days.
Also look at Retry Period in the System menu. It ignores repeat punches by the same person within a set number of minutes (0 to 60), which stops one employee creating five records by pressing the sensor repeatedly.
Common Problems and Fixes
"Invalid ID" when an employee punches
The ID entered does not exist or has no fingerprint enrolled. Check the user under User Mgt. and re-enrol the finger.
Software cannot connect
Check that the PC and machine are on the same subnet, the cable link light is on, DHCP is off, and the communication password in the software matches the device. Try pinging the device IP from the PC.
Memory almost full
Check Sys. Info. for used and free capacity. After a successful download and backup, Delete Attlog under Data Mgt. clears old records. Never delete before you have a backup.
How to Choose a Setup That Will Last
- Keep your router or switch running during power cuts, otherwise LAN downloads fail when the power is out. A mini DC UPS keeps the network gear alive; our mini UPS buying guide explains how to size one.
- Use a dedicated PC or laptop for attendance and payroll. A reliable used business laptop such as the HP ProBook 640 G5 (27,900 Taka at the time of writing) runs ZKTeco software easily and keeps working through short outages on battery.
- A 22 inch monitor makes monthly attendance sheets far easier to review.
- Back up the attendance database every month to a pen drive or cloud folder.
For full menu details, see ZKTeco's K Series Economic Models user manual (PDF).
ZKTeco Attendance Machine Price in Thakurgaon
A ZKTeco K40-class terminal lists at roughly 5,900 to 6,600 Taka at Bangladeshi retailers at the time of writing, and prices in Thakurgaon follow the same national range plus delivery. For the computer side of the setup, Megabuy BD delivers laptops, monitors and mini UPS units all over Bangladesh, including Thakurgaon Sadar, Pirganj, Ranisankail, Baliadangi and Haripur, with cash on delivery.
Related Guides
- Barcode Scanner Buying Guide: 1D vs 2D Explained
- Best Attendance Machine in Bangladesh: How to Choose (2026)
- Shop POS System Setup in Bangladesh: What You Need
- POS Printer 58mm vs 80mm: Which Should You Buy?
Frequently Asked Questions
What is the default IP address of a ZKTeco K40?
According to ZKTeco's K Series manual, the default IP address is 192.168.1.201 with subnet mask 255.255.255.0 and gateway 0.0.0.0. You can change it under the Comm. menu. Set it to a free address in your own network range and turn DHCP off so the address stays fixed for the software.
How many times do I place the finger during enrolment?
Three times. Choose Enroll FP, then place the same finger flat and centred on the sensor three times in a row until the screen confirms success. Use the index, middle or ring finger. Enrol a second finger for anyone whose fingerprints are worn, so they can still punch if the first finger fails.
Can I use the attendance machine without a computer?
Yes. Many K Series units let you set shifts on the device and download ready attendance reports to a USB pen drive, which you open in Excel. A computer with software becomes useful when you have many staff, several machines or need payroll reports with leave and overtime rules.
I forgot the admin fingerprint. How do I get into the menu?
Try the backup password or another administrator first. If nobody can open the menu, the attendance software can usually clear administrator rights remotely when the device is connected. Otherwise contact the seller or ZKTeco's local service partner. This is why you should always create two administrators.
Buy from Megabuy BD
Megabuy BD supplies the office side of an attendance system: authentic monitors, inspected used business laptops and mini UPS units that keep your network running. We deliver nationwide with cash on delivery, and Dhaka orders usually arrive within 24 to 48 hours.
There are no comments for this Article.