D-Link DGS-1210-28 24-Port Gigabit Smart Managed Switch

D-Link DGS-1210-28 24-Port Gigabit Smart Managed Switch Price in Bangladesh

Searching for the D-Link DGS-1210-28 price in Bangladesh? The D-Link DGS-1210-28 is a smart managed switch with 24 Gigabit RJ45 ports and 4 SFP slots for fiber. It gives you control features that simple plug-and-play switches do not have.

This switch is meant for IT teams, small ISPs, corporate offices and campus networks. It helps you split traffic, find network loops and link buildings with fiber. Buyers can also check the D-Link DGS-1210-28 price in Thakurgaon on this same page.

Before you order, decide which smart features you really need on your network. Also plan whether you will use the SFP slots and buy suitable fiber modules. A 19-inch rack or a wide shelf is the best home for this switch.

Top Highlights

• 24 + 4 Ports: Gigabit RJ45 ports plus four SFP fiber slots.
• Smart Management: VLAN, LACP, port mirroring and IGMP snooping supported.
• Network Security: 802.1X authentication and ACLs control who connects.
• Easy Troubleshooting: Loopback detection and cable diagnostics are built in.

About the D-Link DGS-1210-28 24-Port Gigabit Smart Managed Switch

What Smart Managed Means

A smart managed switch has a settings page where you control how traffic moves. You can group ports, watch traffic and block problems before they spread. It sits between a simple unmanaged switch and a costly fully managed core switch.

Copper and Fiber in One Unit

The 24 RJ45 ports connect PCs, access points, printers and NVRs at Gigabit speed. The four SFP slots accept 100 Mbps or 1000 Mbps fiber modules for long links. This lets you connect another floor or building far beyond the 100 metre copper limit.

Ready for the Future

The switch supports IPv6 management and configuration alongside normal IPv4. It also follows IEEE 802.3az Energy Efficient Ethernet to save power on idle ports. These points help the switch stay useful as your network grows.

Design & Performance

Design and Build

The DGS-1210-28 measures 440 x 140 x 44 mm, which is the standard 1U rack size. It fits neatly in a 19-inch network rack next to routers and patch panels. Please confirm with our team whether rack ears come in the box for your unit.

The power supply is internal and accepts 100 to 240V AC at 50 or 60 Hz. Plan backup power with our mini UPS buying guide, since load shedding can drop the whole network. All twisted-pair ports support auto MDI/MDIX, so any straight cable works.

Performance in Daily Use

Retail listings give a switching capacity of 56 Gbps and a forwarding rate near 41.7 Mpps. The switch uses store-and-forward switching and stores about 16,000 MAC addresses. In daily use, all 28 ports can carry heavy traffic without slowing each other down.

Maximum power use is listed at 22.45W, with standby power near 17.7W. Spanning Tree Protocol stops loops if someone connects two cables by mistake. Loopback detection and cable diagnostics then help you find the faulty port fast.

Who It's For

Small ISPs and Cable Operators

Local internet providers need fiber uplinks and traffic control in every distribution box. The SFP slots and VLAN support help separate customers and services. Our guide to the best MikroTik router for ISP networks pairs well with this switch.

Corporate and Bank Offices

Offices with separate teams often want accounts, guests and cameras on different networks. VLANs keep each group apart while using the same switch hardware. 802.1X and ACLs add another layer of control over who can connect.

Schools, Hospitals and Campuses

Large buildings need fiber links between floors and many wired points on each floor. LACP can join two links together for more bandwidth and backup. IGMP snooping keeps video and multicast traffic from flooding every port.

Simple Buying Guide

Check Your SFP Needs

SFP modules are usually sold separately, so plan their type and distance. Single-mode and multi-mode fiber need different modules. Ask your fiber installer before you buy anything.

Know Your Management Skills

Smart features are useful only when someone can set them up properly. If nobody on your team manages networks, an unmanaged switch may be easier. You can still learn the basics over time with D-Link's guides.

Plan Cables and Backup Power

Good Cat 6 cables from our cables and converters section keep Gigabit links stable. Label both ends of every cable before it goes into the rack. Clear labels save hours when you troubleshoot a port later.

Easy Steps to Check Before You Order

First, list the VLANs, uplinks and wired devices you plan to run through this switch on day one.

Next, check whether you need fiber links, and note which SFP modules match your fiber cable and distance.

Then, confirm you have rack space of 1U or a wide shelf, plus a nearby AC power point.

Last, make sure someone on your team can log in and configure the smart features safely after installation.

What's in the Box

The box contents are not confirmed in our source, so please check with our team before ordering. SFP modules are not listed as included, so plan to buy them separately. On delivery, check the switch, power cable and any brackets inside the box.

Warranty

The D-Link DGS-1210-28 comes with a 1 year warranty, as stated by our source. Keep your invoice and the box for any claim. Our team will guide you through the process.

Why Buy From Megabuy BD?

Megabuy BD sells 100% authentic products, with official warranty where it is provided. We deliver nationwide, including Thakurgaon, and Dhaka orders usually arrive within 24 to 48 hours. Cash on delivery is available on orders across the country, so you pay only after the parcel arrives.

Our team offers support in Bangla and English before and after your purchase. You can ask us about ports, SFP plans or which switch suits your office. We aim to make network shopping simple for businesses and ISPs.

Frequently Asked Questions

What is the D-Link DGS-1210-28 price in Bangladesh?

The latest D-Link DGS-1210-28 price in Bangladesh is shown at the top of this product page. Prices can change with stock and import costs. Please check the page or contact our team to confirm the current price before you place an order.

Are SFP modules included with the DGS-1210-28?

SFP modules are not listed as included in our source information. You will usually need to buy modules that match your fiber type and distance. Contact our team before ordering, and we will help you confirm the right module for your network setup.

Is the DGS-1210-28 hard to set up?

Basic use is simple, because the switch forwards traffic as soon as you connect it. Smart features like VLANs, LACP and ACLs need setup through the management interface. Someone with basic networking knowledge can usually learn these settings in a short time.

Order From Megabuy BD

Check the latest D-Link DGS-1210-28 price in Bangladesh and order it from Megabuy BD today.